ADDING MARGINS(MARGIN SHIFT)
Overview
This function shifts the copy image right, left or down to adjust the margin.
This is convenient when you wish to bind the copies with a string or in a binder.
This is convenient when you wish to bind the copies with a string or in a binder.
Shifting the image to the right so the copies can be bound at the left edge
| Not using the Margin Shift | Using the Margin Shift |
|---|---|
|
|
Staple positions
Rotation copy cannot be used in combination with the margin shift function.
To change the default margin shift setting:
In "Setting mode", select [System Settings]→[Copy Settings]→[Copy Setting]→[Initial Margin Shift Setting].
Operation
Place the original and tap the [Preview] key.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
Tap the [Others] key, and tap the [Margin Shift] key. 
Tap the image shift direction.
Sets a margin shift width.
- Tap the numeric value display indicating the margin shift area on the front side or reverse side, and enter the area using the numeric keys.
- To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with
. - If you set the [Adjust 2nd pg value to 1st.] checkbox to
, 
goes out and you can set sides 1 and 2 separately.
After the settings are completed, tap 
and [Back] keys in sequence.
and [Back] keys in sequence.
- To cancel the margin shift setting:Tap the [Off] key.
- To cancel all settings:Tap the [CA] key.
Check the preview image in the preview screen.
Check whether or not settings produce the required results.
To cancel all settings:Tap the [CA] key.
Tap the [Color Start] or [B/W Start] key to start copying.
When making only one set of copies, you do not need to specify the number of copies.
