REVERSING WHITE AND BLACK IN A COPY(B/W REVERSE)

Overview

This function reverses black and white in a copy to create a negative image. This function can only be used for black and white copying.

Originals with large black areas (which use a large amount of toner) can be copied using Black/White Reverse to reduce toner consumption.

B/W Reverse must be specified before scanning the original.
When this function is selected, the "Original Image Type" setting for exposure adjustment automatically changes to "Text".

When this function is selected, you cannot use the [Color Start] key.

Tap the [Others] key, and tap the [B/W Reverse] key.

A checkmark appears on the icon.
After the settings are completed, tap the [Back] key.

To cancel B/W reverse:
Tap the [B/W Reverse] key to uncheck it.

Place the original and tap the [Preview] key.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.

Check the preview image in the preview screen.

Check whether or not settings produce the required results.

To cancel all settings:
Tap the [CA] key.

Tap the [B/W Start] key to start copying.

When making only one set of copies, you do not need to specify the number of copies.

To make two or more sets of copies:

Tap the copies display key to specify the number of copies.