ADJUSTING RED/ GREEN/ BLUE IN COPIES(RGB)

Overview

This function heightens or lightens any one of the three color components R (red), G (green), and B (blue).

RGB must be specified before scanning the original.

Tap the [Others] key, and tap the [RGB] key.

Tap the key of the color you want to adjust.

Tap

or slide the slider to adjust the coloring.

After the settings are completed, tap

and [Back] keys in sequence.

Only one color can be adjusted. (If you adjust one color and then adjust another color, the adjustment of the first color is canceled.)

To cancel the RGB adjust setting:
Tap the [Cancel] key.

Place the original and tap the [Preview] key.

Place the original in the document feeder tray of the automatic document feeder, or on the document glass.

Check the preview image in the preview screen.

Check whether or not settings produce the required results.

To cancel all settings:
Tap the [CA] key.

Tap the [Color Start] key to start copying.

When making only one set of copies, you do not need to specify the number of copies.

To make two or more sets of copies:

Tap the copies display key to specify the number of copies.