ADJUSTING THE COLOR(COLOR BALANCE)
Overview
This function adjusts the color, tone, and density.
This function divides each of colors, yellow, magenta, cyan, and black, into eight gradations from light to dark, and adjusts the average density of each gradation.
As necessary, it collectively adjusts all eight gradations.
As necessary, it collectively adjusts all eight gradations.
Color Balance must be specified before scanning the original.
To change the default color balance setting:
In "Setting mode", select [System Settings]→[Copy Settings]→[Color Adjust]→[Initial Color Balance Setting].
Operation
Tap the [Others] key, and tap the [Color Balance] key. 
Tap the tab of the color you want to adjust.
Tap the 
key or slide the slider to adjust the color balance.
To individually adjust eight sliders, set the [Set in a Batch] checkbox to 
, and slide the control of each slider.
When using the key to individually adjust eight sliders, tap the required slider and tap the key.
, and slide the control of each slider.When using the
key to individually adjust eight sliders, tap the required slider and tap the key.
As necessary, tap the tab of each color, and repeat this step.
Color Balance Setting
- To return the current color balance to the default:
- Tap the [Size Reset] key.
- To return all color balances to defaults:
- Tap the [Cancel All] key. The values of all eight gradations will return to the default color balance values.
The default color balance is set by selection of [System Settings] in "Setting mode" →[Copy Settings]→[Color Adjust]→[Initial Color Balance Setting].
Place the original and tap the [Preview] key.
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
Tap the [Color Start] key to start copying.
When making only one set of copies, you do not need to specify the number of copies.
