PUNCH SETTING
Overview
This function punches copies and outputs them to the tray. You can select paper size of 7-1/4" x 10-1/2"R to 11" x 17" (A4, A3) for punching.
You can view punch positions on the "PREVIEW SCREEN".
- A punch module is required for paper punch.
- You cannot use 12" x 18" (A3W) size papers, and special media such as transparency film and tab papers.
- You cannot use a paper punch together with the staple and paper folding.
Operation
Tap the [Others] key, and tap the [Punch] key. 
Tap the [On] key.
After the settings are completed, tap 
and [Back] keys in sequence.
and [Back] keys in sequence.
- Selecting the Offset check box outputs the sorted paper sheets while shifting them set by set to enable the user to easily remove each set from the output tray.
- To change the output tray, tap the [Output Tray] key, and select the output destination.