SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE
Overview
When the original size is not standard (inch size or non-standard size) or is not detected correctly, manually specify the original size.
- When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed.
The image is sent in Mono2 only. - When [Postcard], [Photo Size], or a standard size (direct entry) is selected, send size cannot be changed.
Operation
After tapping the [Original] key. 
Tap the [Scan Size] key. 
Tap the appropriate original size key.
After the settings are completed, tap 
.
.
- If you are sending a long original, tap the [Long Size] key.
Use the automatic document feeder to scan a long original. The maximum width that can be scanned is 39-3/8" (1,000 mm) (the maximum height is 11-5/8" (297 mm)).