SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES
Overview
When scanning a non-standard size original such as a postcard, specify the original size by numeric values after placing the original. The width can be from 1" to 17" (25 mm to 432 mm), and the height can be from 1" to 11-5/8" (25 mm to 297 mm).
When the scan size is specified by numeric values, the send size cannot be specified.
Operation
Tap the [Original] key.
After tapping the "Scan Size" key.
Tap the [Direct Entry] key, and enter the scan size.
- Tap the areas displaying sizes in width and height respectively, and enter the sizes using the numeric keys.
- It is convenient to use
to finely adjust the entered size.
Tap the [OK] key.
After the settings are completed, tap 
twice.
On the base screen, check that the specified size is displayed on the [Original] key.
To cancel the specified size settings:
Tap the [Auto] key.
twice. On the base screen, check that the specified size is displayed on the [Original] key.
To cancel the specified size settings:Tap the [Auto] key.