PRINTING RECEIVED DATA AT A SPECIFIED TIME
You can start printing the received data at a specified time.
For stress-free printing, you should avoid printing large numbers of pages at peak times during the day, and when you do not urgently need to print.
For stress-free printing, you should avoid printing large numbers of pages at peak times during the day, and when you do not urgently need to print.
- The printed data is automatically deleted from memory.
- If the power is turned off at the specified time, printing will start at the timing when the power is turned on.
- This function is enabled if [System Settings] → [Operation Settings] → [Preview Setting] are selected in "Setting mode (administrator)" and if [Received Data Image Check Setting] is enabled.
If Hold Setting for Received Data Print is enabled, this function is not available.
- To print received data at the specified time:In "Setting mode", select [System Settings]→[Image Send Settings]→[Operation Settings]→[Default Settings]→[Time Specified Output of Received Data].
- To disable the hold setting for received data print:In "Setting mode", select [System Settings]→[Image Send Settings]→[Operation Settings]→[Default Settings]→[Hold Setting for Received Data Print].