SPECIFYING THE ORIGINAL SCAN SIZE IN PAPER SIZE

Overview

When the original size is not standard (inch size or non-standard size) or is not detected correctly, manually specify the original size.
  • When [Long Size] is selected, the 2-sided scanning setting and send size cannot be changed.
    The image is sent in Mono2 only.
  • When [Postcard], [Photo Size], or a standard size (direct entry) is selected, send size cannot be changed.

Operation

After tapping the [Original] key, tap the [Scan Size] key.

Tap the appropriate original size key.
After the settings are completed, tap .
If you are sending a long original, tap the [Long Size] key.
Use the automatic document feeder to scan a long original. The maximum width that can be scanned is 39-3/8" (1,000 mm) (the maximum height is 11-5/8" (297 mm)).
Back to top