SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES
Overview
When scanning a non-standard size original such as a card or postcard, specify the original size using numeric values after placing the original.
The width can be from 1" to 17" (25 mm to 432 mm), and the height can be from 1" to 11-5/8" (25 mm to 297 mm).
The width can be from 1" to 17" (25 mm to 432 mm), and the height can be from 1" to 11-5/8" (25 mm to 297 mm).
When the scan size is specified by numeric values, the send size cannot be specified.
Operation
Tap the [Original] key.
After tapping the "Scan Size" key, tap the [Direct Entry] key.
Specify the original size.
- Tap the areas displaying width and height sizes respectively, and enter the sizes using the numeric keys.
- It is convenient to use
to finely adjust the entered size.
Tap the [OK] key.
On the base screen, check that the specified size is displayed on the [Original] key.
After the settings are completed, tap 
twice.