TRANSMITTING METADATA
Overview
Select a metadata set, enter each item, and perform metadata delivery.

In addition, perform metadata delivery using document filing in [Document Operations] in "Setting mode (Web version)."

- In data entry mode, configure metadata settings to perform metadata delivery.
To perform transmission without sending metadata, switch the screen from data entry mode to a different mode and then perform transmission. - When metadata settings have been configured or an address is specified in data entry mode, it will not be possible to switch to another mode.
- Before configuring metadata settings, specify addresses in all available modes. After metadata settings have been configured, specify only addresses in modes that are allowed in the selected metadata.
Operation






To directly enter the metadata value, tap the [Direct Entry] key. On the soft keyboard screen that appears, tap the [OK] key. You will return to the screen shown in step 3.
After the settings are completed, tap
.
After the settings are completed, tap



- Configure job detail settings and then start transmission using the same operations as in other modes.
- When directly entering an address, tap [Touch to enter a file name] to display the screen for selecting an address type. If the address type such as E-mail, Internet Fax, Fax, Network Folder, or Direct SMTP is selected, the address type entry screen appears.