COLORS ARE OFF
If you are unable to solve a problem using the solutions in this manual, press the [Power] button and then turn the main power switch to the "
"position. Wait at least 10 seconds and then turn the main power switch to the "
"position. After the main power indicator color changes to green, press the [POWER] button.
"position. Wait at least 10 seconds and then turn the main power switch to the ""position. After the main power indicator color changes to green, press the [POWER] button.
When the background color of the job status display at the upper right corner of the touch panel is not gray, do not switch off the main power switch or unplug the power plug. This may damage the hard drive or cause the data being stored or received to be lost.
| Point to check | Solution |
|---|---|
| Did you perform "Registration Adjustment"? | Ask your administrator to perform "Registration Adjustment". "Setting mode" → [Device Control]→[Registration Adjustment] If the color tones are off, perform [Auto Color Calibration] after finishing registration adjustment. (If the colors are still off after calibration, repeating calibration may improve the results.) "Setting mode" → [Printer Settings]→[Auto Color Calibration] |