This section describes the steps for setting the original on the document glass.
  • Close the automatic document feeder slowly. Abruptly closing the automatic document feeder may damage it.
  • Take care that your fingers are not pinched when closing the automatic document feeder.
When scanning a thick book or other thick original, push up the back of the automatic document feeder and then place the original.
When closing, open the automatic document feeder all the way and then close it.

Allowed original sizes
Maximum original size
Standard size
11" (longitudinal) x 17" (transversal)
297 mm (longitudinal) x 420 mm (transversal) or A3
Non-standard size
11-5/8" (longitudinal) x 17" (transversal)
297 mm (longitudinal) x 432 mm (transversal)
When the original is a non-standard size, see the appropriate explanation below for the mode you are using.
- COPY "SPECIFYING THE ORIGINAL SIZE"
- FAX "SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES"
- IMAGE SEND "SPECIFYING THE ORIGINAL SCAN SIZE USING NUMERIC VALUES"