OPERATIONS COMMON TO ALL MODES
DOCUMENT GLASS
< steps in all >
Open the automatic document feeder.
Load the paper with the print side facing down.
Place the original face down and align the top left corner of the original with back left (at the tip of the mark 
) of the document glass.
) of the document glass.
Do not place any objects under the original size detector.
Closing the automatic document feeder with an object underneath may damage the original size detector or disable correct detection of the original size.
Closing the automatic document feeder with an object underneath may damage the original size detector or disable correct detection of the original size.
When placing a non-standard size original on the document glass, the size can be detected easily if a blank sheet of 8-1/2" x 11" (A4), 5-1/2" x 8-1/2" (B5), or other standard size paper is placed on top of the original.
Close the automatic document feeder.
After placing the original, close the automatic document feeder. If the unit is left open, parts outside of the original will be copied in black, causing excessive use of toner.