This includes the offset function that outputs sorted paper while staggering each set of paper, the staple sort function that staples each set of prints, the saddle stitch function that automatically staples the center of the sheets and folds the sheets in half, and the paper folding function that folds paper in half.
To punch holes in printed paper, install an optional hole punch module.
Function names
Click or tap the numbers to make its details pop up.
  • A paper pass unit is required to install a saddle finisher as well as a stand/1x500/2x500 sheet paper drawer.
  • Do not place heavy objects on the saddle finisher or press down on the saddle finisher.
  • Exercise caution when you turn on the power and when printing is taking place, as the tray may move up and down.
  • A saddle finisher cannot be installed simultaneously with a finisher, finisher (large stacker) or saddle finisher (large stacker).
Supplies
The saddle finisher requires the following staple cartridge:
Finisher unit
Staple cartridge (approx. 5000 staples per cartridge x three cartridges) MX-SCX1
Saddle stitch unit
Staple cartridge (approx. 2000 staples per cartridge x three cartridges) AR-SC3
Saddle finisher maintenance
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation procedure to replace the staple cartridge.