Load a tab sheet in the bypass tray, and make a copy on a tab.
Prepare appropriate originals for tab captions.
Relation between the originals and the tab paper
Tab copying with a left binding
Originals Placing the originals Loading tab paper
Tab copying with a right binding
Originals Placing the originals Loading tab paper
Tab Copy must be specified before scanning the original.
To change the default image shift width for tab copying:
In "Setting mode", select [System Settings] → [Copy Settings] → [Copy Setting] → [Initial Tab Copy Setting].
The default image shift width can be set from 0" to 5/8" (0 mm to 20 mm). The factory default setting is "1/2" (10 mm)".