When performing an F-code operation, the F-code (sub-address and passcode) is appended to the fax number that is dialed. Check the F-code (sub-address and passcode) stored in the memory box in the other machine before you perform an F-code transmission. It is convenient to store an F-code (sub-address and passcode) together with the fax number in a one-touch key or group key.
To use the following F-code communication functions, your machine must dial the other machine.
  • F-CODE CONFIDENTIAL TRANSMISSION
  • F-code polling reception
  • F-code relay request transmission
To use the following F-code communication functions, the other machine must dial your machine.
  • F-code confidential reception
  • F-code polling memory
  • F-code relay broadcast transmission
If the destination machine does not have a passcode configured in the F-code, do not enter a passcode when dialing that machine.
Communication using the F-code (sub-address and passcode) is not available when dialing using a speaker or manual transmission.
To store and edit one-touch keys and group keys:
Select [Address Book] in "Setting mode".