When an F-code confidential fax received, the fax is stored in the memory box specified by the F-code. To check received faxes, enter the print passcode.
  • Confidential faxes are automatically given priority in the print job queue.
  • The fax is automatically cleared from the memory box after being printed.
To print transaction report automatically when an F-code confidential fax is received:
In "Setting mode", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Default Settings] → [Transaction Report Print Select Setting] → [Confidential Reception].
If you forget the print passcode:
There is no way to use the machine to check a print passcode that has been specified. Exercise care not to forget the passcode. Should you forget or need to verify the passcode, contact your dealer or nearest SHARP Service Department.