When your machine receives a transmission request from another machine, this function sends a fax stored in an F-code memory box (polling memory) in your machine to that machine. The other machine must correctly specify the F-code (sub-address and passcode) configured in your machine. Otherwise, transmission will not take place.
An original to be sent to the other machine using F-code polling communication must be previously scanned into an F-code memory box (polling memory) in your machine.
  • If other documents have already been stored in the memory box, the document is added to the previously stored documents.
  • By factory default, the document sent to the other machine will be deleted automatically.
To create F-code memory boxes:
In "Setting mode", select [System Settings] → [F-Code Memory Box].