The top page displays the system information of the machine.
It displays the model name, current status, and machine location.
Item Description
[Update] key Updates the information displayed.
Unit Serial Number Indicates the serial number of the machine.
Name If [Name] is not set, [Not Set] appears.
When you tap the [Not Set] key, the [Machine Identification] screen appears.
Model Name Displays the standard model name of the machine.
Machine Location The information entered in the [Machine Location] item in [Machine Identification] appears.
If no name has been set, [Not Set] appears.
Current Status Displays the current status of the machine.
The display status depends on the PAU display format.
If two or more errors occur at the same time, only one status is displayed according to the priority order.
The errors are displayed in the following priority order.
  • Printer error
  • Account Limit
  • Incorrect Paper
  • Overdue Service Maintenance
  • Paper Jam
  • Marker Supply Missing
  • Toner Empty
  • Replace Used Toner Container.
  • Cover Open
  • Paper Empty
  • Input Tray Empty
  • Specified Input Tray Open
  • Specified Output Tray Full
  • Offline
  • Printer Warning
  • Toner Low
  • Paper Low
  • Input Tray Open
  • Output Tray Full
  • Output Tray Nearly Full
  • Near to overdue service maintenance
  • Online
  • Auto Power Shut-Off
  • Warming Up
  • BUSY
Memo Displays a text that the administrator entered.
Device Status Graphically displays the current status of the machine.
[Reboot the MFP] key Displays the restart screen.
[Enter the Power Save Mode] key Displays the power save mode screen.
Machine Identification Screen
Item Description
Name Enter the model name and other information of the machine.
Machine Code Enter the machine code of the machine.
Machine Location Enter the name of the place where the machine is installed (e.g., section name).
Memo Enter the contact or other information of the administrator.