You can reset the current Setting mode settings to the previously stored settings or to the factory default settings.
Restore Factory Defaults
Restores the current settings (you have selected in Setting mode) to the factory default settings. If you wish to create a record of the current settings before restoring, print the current settings by selecting [System Settings] in "Setting mode" → [List Print (Administrator)]".
When settings are changed, the changes will take effect after the machine is restarted. To restart the machine, see "TURNING ON THE POWER".
Store Current Configuration
Stores the currently configured Setting mode in the machine memory.
The stored settings will be retained even if the [Power] button is turned off. To retrieve the stored settings, use "Restore Configuration" below.
Items not stored
  • Network Settings: These are not stored as unexpected settings may cause damage to the network.
  • Product Keys: Product Keys are not stored as reissue of keys may be necessary.
Restore Configuration
Restores the settings stored with " Store Current Configuration".
The current settings are replaced by the retrieved settings.