The Auto Power Shut-Off can be enabled or disabled, and the Preheat Mode can be set.
This function reduces your power costs, and at the same time helps conserve natural resources and reduce pollution.

Preheat Mode Setting
The time until Preheat Mode activates can be set to any number of minutes from 1 to 240.
Preheat Mode will activate when the set duration of time elapses after printing ends and no further operations are performed. This function reduces your power costs, and at the same time helps conserve natural resources and reduce pollution.
Select the time that best suits the needs of your workplace.
The panel display can be turned Off in the Preheat mode.
Preheat mode cannot be disabled.
The Auto Power-Off transition time is fixed.
The Auto Power-Off transition time is fixed.
When this setting is enabled, the [Change transition time by time of day.] option is disabled.
If the Auto Power-Off is disabled, the time you have set here is disabled.
AS SOON AS THE REMOTE JOB IS FINISHED, ENTER AUTO POWER SHUT OFF MODE.
This function works in Auto Power-Off mode. When the machine receives a print job from the PC, the machine prints out the data, and immediately returns to the Auto Power-Off mode.
Change Transition Time by Time of Day
This function controls the power optimally for each time period by analyzing the use of the machine based on job logs obtained during a 4-week period.
When this setting is enabled, the [Fix transition time] option is disabled.
  • The image transfer control settings are not changed.
  • This does not link to the Power On/Off Scheduling. If both of them are enabled, the Power On/Off Scheduling settings precede.
  • Pages are counted for each paper size separately.
  • When the power supply of the machine was off, there was no job during this time.
Transition to Energy Saving and Auto Power Shut-Off modes
Pattern Transition time Average outputs per hour*
Mode1 (Job Start Priority1) After 1 hour 700 or more
Mode2 (Job Start Priority2) After 30 minutes 150 to 699
Mode3 (Energy Saving Priority1) After 5 minutes 40 to 159
Mode4 (Energy Saving Priority2) After the minimum time period Up to 39
* Factory default setting
Auto
This function controls the power optimally for each time period by analyzing the use of machine based on job logs obtained during a certain time period.
If the machine does not have the 4-week job log information, the machine enters the template2 (Mode3 (Energy Saving Priority1) between 8:00 and 18:00 hours). Then after that, it enters Mode4 (Energy Saving Priority2).
Manual
You can set a pattern for each time band.
The machine already has the 3-pattern template. The Energy Save pattern can be added to the "Original Eco Patterns 1 to 4".
Three-pattern template
Template Pattern Description of mode
Template 1 All "Energy Save Priority 2" The machine runs in the "Mode4 (Energy Saving Priority2)" all the time.
Template 2 8:00-18:00 "Energy Save Priority 1" The machine runs in "Mode3 (Energy Saving Priority1)" between 8:00 and 18:00, and in "Mode4 (Energy Saving Priority2)" at other times.
Template 3 8:00-18:00 "Job Start Priority 1" The machine runs in "Mode1 (Job Start Priority1)" between 8:00 and 18:00, and in "Mode4 (Energy Saving Priority2)" at other times.
Sleep Mode Settings
"Low Power" or "Fast Wake Up" can be selected.