APPLICABLE PAPER TYPES

Overview

This section describes paper types that can be used and those that cannot be used. It also explains about the print side when loading paper into the paper tray.
Heavy paper, thin paper, and other types of paper except plain paper are referred to as special media.
  • Various type of paper are commercially available, some of which cannot be used on the machine.
    Before using any paper, consult the dealer or "SHARP Service Department".
  • The image quality and toner fusibility of paper may change due to ambient conditions, operating conditions, and paper characteristics, resulting in image quality inferior to that of Sharp standard paper.
    Before using any paper, consult the dealer or "SHARP Service Department".
  • The use of non-recommended or non-usable paper may result in skewed feeding, misfeeds, poor toner fusing (the toner does not adhere to the paper well and can be rubbed off), or machine failure.
  • The use of non-recommended paper may result in misfeeds or poor image quality. Before using non-recommended paper, check whether printing can be performed properly.

Usable paper

Specifications of plain paper, heavy paper and thin paper
Plain paper
  • Sharp standard paper
  • 21 lbs (80 g/m2). For paper specifications, see "SHARP STANDARD PAPER SPECIFICATIONS" in the "Quick Start Guide".
  • Non-Sharp standard plain paper
  • 16 lbs. to 28 lbs. (60 g/m2 to 105 g/m2)
Heavy paper 28 lbs. to 79 lbs. (106 g/m2 to 300 g/m2)
Thin paper 13 lbs. to 16 lbs. (55 g/m2 to 59 g/m2)
Recycled paper, colored paper and pre-punched paper must meet the same specifications as plain paper.
Before using any paper, consult the dealer or "SHARP Service Department".
Types of paper that can be set in each tray
TRAY 1/2 Tray 3 Tray 4 Bypass - Tray Tray 5
Large capacity tray
(MX-LC12 / MX-LCX3 N)		 LARGE CAPACITY TRAYS Bypass tray
(for large capacity trays)		 Inserter
(Upper / Lower)
Tray 5
Upper		 Tray 6
Lower
Thin paper - - - Yes - Yes Yes Yes -
Plain paper Yes Yes Yes Yes Yes Yes Yes Yes Yes
Recycled paper Yes Yes Yes Yes Yes Yes Yes Yes Yes
Color Yes Yes Yes Yes Yes Yes Yes Yes Yes
Letter head Yes Yes Yes Yes Yes Yes Yes Yes Yes
Pre-printed Yes Yes Yes Yes Yes Yes Yes Yes Yes
Pre-punched Yes Yes Yes Yes Yes Yes Yes Yes Yes
Heavy paper 1: 28 lbs to 46 lbs (106 g/m2 to 176 g/m2) - Yes Yes Yes Yes Yes Yes Yes Yes
Heavy paper 2: 47 lbs to 58 lbs (177 g/m2 to 220 g/m2) - Yes Yes Yes Yes Yes Yes Yes Yes
Heavy paper 3: 59 lbs to 68 lbs (221 g/m2 to 256 g/m2) - - - Yes - Yes Yes - -
Heavy paper 4: 69 lbs to 79 lbs (257 g/m2 to 300 g/m2) - - - Yes - Yes Yes - -
Embossed - - Yes Yes - Yes Yes - -
Tab paper - - Yes Yes - Yes Yes Yes -
Transparency film - - Yes Yes - Yes Yes Yes -
Labels - - Yes Yes - Yes Yes - -
Glossy paper - - - Yes - Yes Yes - -
Envelope - - - Yes - - - Yes -
Yes: Can be used
-: Cannot be used
For detailed information on the sizes and types of paper that can be loaded into each tray of the machine, see "MACHINE SPECIFICATIONS/COPY SPECIFICATIONS" and "PAPER TRAY SETTINGS" in "Setting mode" in the "Quick Start Guide".
Recycled paper, colored paper and pre-punched paper must meet the same specifications as plain paper.
Before using any paper, consult the dealer or "SHARP Service Department".
Setting orientation of the print side
The setting orientation varies for the print side of paper, depending on the tray used.
Tray In normal status With letter head or pre-printed paper set
Trays 1 - 4 Facing up Facing down
Bypass tray , tray 5, tray 6 Facing down Facing up
When [Disabling of Duplex] is set for "Letter Head" or "Pre-Printed", set the print side in the same orientation as for the ordinary operation.
To set [Disabling of Duplex]:
In Setting mode (administrator), select [System Settings] → [Device Control] → [Disabling of Duplex].

Paper that cannot be used

  • Special media for an ink jet printer
    (fine paper, glossy paper, glossy film, etc.)
  • Carbon paper or thermal paper
  • Pasted paper
  • Paper with clips
  • Paper with fold marks
  • Torn paper
  • Oil feed transparency film
  • Thin paper less than 13 lbs (55 g/m2)
  • Heavy paper as thick as 80 lbs (301 g/m2) or more
  • Irregularly shaped paper
  • Stapled paper
  • Damp paper
  • Curled paper
  • Paper whose print side or reverse side has been already printed on by another printer or multifunction device
  • Paper with a wave-like pattern due to moisture absorption

Non-recommended paper

  • Iron-on transfer paper
  • Japanese paper
  • Perforated paper
Back to top