TRAY 1/2

Overview

A maximum of 1,200 sheets of 8-1/2" × 11" (A4) paper can be loaded into tray 1.
A maximum of 800 sheets of A4 paper can be loaded into tray 2.
If you loaded paper of a different type or size from the paper previously loaded, be sure to check the settings in "Setting mode". An incorrect setting may cause print failure, printing on paper of an incorrect size, or type or paper misfeeds.
To check the type and size of paper:
In "Setting mode", select [System Settings] → [Paper Tray Settings].
Do not place heavy objects on the tray or press down on the tray.

Operation

  1. Pull out the paper tray

    Gently pull the tray out until it stops.
    Keep holding the handle until the lock is released.

  2. Lift the feed roller, and place paper into the tray

    Load the paper with the print side facing up. The stack must not be higher than the indicator line (maximum of 1,200 sheets for tray 1, or maximum of 800 sheets for tray 2).
    Fan the paper well before loading it. If the paper is not fanned, multiple sheets may feed at once and cause a misfeed.

  3. Lower the feed roller, and gently push the paper tray into the machine

    Push the tray firmly all the way into the machine.

Back to top