LARGE CAPACITY TRAY

Overview

Use the large capacity tray for outputting massive prints that cannot be processed using the regular tray.
  • Large capacity tray (MX-LC12) stores a maximum of 3,500 sheets of 8-1/2" × 11", A4 and B5 paper.
  • Large capacity tray (MX-LCX3 N) stores a maximum of 3,000 sheets of paper from 12" × 18"(A3W) to 8-1/2"11"R(B5).
When changing the paper size, contact your dealer or "SHARP Service Department".
If you loaded paper of a different type from the paper previously loaded, be sure to check the settings in "Setting mode".
To check the type of paper to be set in the tray:
In "Setting mode", select [System Settings] → [Paper Tray Settings].
Do not place heavy objects on the tray or press down on the tray.

Operation

Large capacity tray (MX-LC12)

  1. Pull out the paper tray

    Gently pull the tray out until it stops.

  2. Place the paper in the center of the paper table

    Load the paper with the print side facing down. The stack must not be higher than the indicator line (maximum of 3,500 sheets).

    Fan the paper well before loading it. If the paper is not fanned, multiple sheets may feed at once and cause a misfeed.

  3. Gently push the paper tray into the machine

    Push the tray firmly all the way into the machine.

Large capacity tray (MX-LCX3 N)

  1. 2

    Press the operation button

    The operation button blinks, and the tray paper table goes down to the paper loading position. Wait until the operation button light goes off.

    Do not pull out the tray until the light goes off. If you pull out the tray forcibly while the button lights up or blinks, a machine failure may be resulted.
  2. 2

    Pull out the paper tray

    Gently pull the tray out until it stops.

  3. 2

    Place the paper in the center of the paper table

    Load the paper with the print side facing down. The stack must not be higher than the indicator line (maximum of 3,000 sheets).
    When a certain volume of paper is loaded, the paper table automatically goes down slightly and stops. Repeat this operation in the same way to load paper.

    Caution:
    Do not insert your hand into the space inside the paper table when you load paper.

    Do not insert spare paper or objects into the space inside the tray.

  4. 2

    Gently push the paper tray into the machine

    Push the tray firmly all the way into the machine. The paper table goes up after the tray is pushed in. The operation button blinks while the paper table goes up. The button lights up when the paper table has gone up.

Back to top