WHEN A COMMUNICATION ERROR OCCURS

Overview

If a communication error occurs or the other fax machine does not answer the call within a preset period of time, transmission will automatically be attempted again after a preset interval. This function only operates in memory transmission mode. (Recall in Case of Communication Error on Receiving Machine)

In direct transmission mode, transmission will not automatically be attempted again

To cancel transmission:

Do so from the job status screen.

CANCELING THE FAXES CURRENTLY BEING SENT AS WELL AS RESERVED FAXES

To set the number of recall attempts and the interval between attempts when a transmission fails due to an error:

In "Setting mode (administrator)", select [System Settings] → [Image Send Settings] → [Fax Settings] → [Send Settings] → [Recall in Case of Communication Error].
The factory default setting is two attempts at 3-minute intervals.