DIALING FOR F-CODE COMMUNICATION
Overview
When using the F-code communication, dial the Fax number of the other machine and the F-code (consisting of the sub-address and passcode). First, check the F-code (the sub-address and passcode) being set in the memory box of the other machine. Also, you should register the F-code (the sub-address and passcode) in the one-touch dial and group dial numbers for your convenience.
The dialing functions of this machine
When you use any of the following F-code communication functions, dial the line number of the other machine.- F-code Confidential Transmission
- F-code Polling Reception
- F-code Relay Request Transmission
The dialing functions of the other machine
When your machine is dialed from the other machine, the following F-code communication functions are used.- F-code Confidential Reception
- F-code Polling Memory
- F-code Relay/Broadcast Transmission
If no passcode is set at the destination machine, you can dial the line number without passcode.
You cannot use the F-code (sub-address and passcode) communication during speaker dialing.