PRINTING A STORED FILE

Overview

A file stored using document filing can be retrieved and printed when needed. The settings used when the file was stored are also stored, and thus the file can be printed again using those settings. The file can also be modified before printing by changing the print settings.
  • A file saved in black and white or grayscale cannot be printed in color.
  • You cannot print a long-size document if you have saved it using the "Scan to HDD", "Scan to External Memory Device", "E-mail", "FTP/Desktop" or "Network Folder".
    However, you can print the long-size document if the settings data saved in "E-mail", "FTP/Desktop" or "Network Folder" contains the "Fax" or "Internet Fax" destination address.
  • If print settings are changed when a stored file is printed, the only changed setting that can be stored is the number of prints.
  • The printing speed may be somewhat slow depending on the resolution and exposure mode settings of the stored file.

Operation

Print a file using the same settings as those used to save it.

Select a file and tap the [Print Now] key.
If you wish to delete data after its printing, check the [Print and Delete the Data] box to display the icon.
To print a file in monochrome mode, check the [Print B/W] box to display the icon.

Print a file with different settings.

Select a desired file, and proceed as follows.
  1. 2

    Tap the [Choose Print Settings] key

  2. 2

    Change the print settings

    Check the [Delete] box to display the icon, and the data will be deleted after printing.
    Check the [Print B/W] box to display the icon, and the color data will be printed in monochrome mode.

  3. 2

    Tap the [Start] key

Back to top