F-CODE MEMORY BOX

F-Code Memory Box

This section explains how to store memory boxes for various types of F-code communication.

Adding or editing an F-Code Memory Box

When the [Add] key is tapped, the F-code memory box registration screen appears. Up to 100 F-code memory boxes can be stored for all functions (polling memory, confidential, and relay broadcast).
When you tap an F-code memory box name, the registration screen for that F-code memory box appears. You can now edit it.
List of Set Up Items
Item Description
Items common to all types
Box Type Select the type of box.
  • Polling Memory: Store a memory box for F-code polling memory. The sub-address and passcode that you store in the memory box are necessary for the other machine to poll the machine (request transmission) using F-code communication.
  • Confidential: Store a memory box for F-code confidential communication. In addition, store a "Print PIN" in the memory box to print faxes received by confidential reception. The sub-address and passcode that you program in the memory box are necessary for the other machine to send a fax to the machine by F-code confidential transmission.
  • Relay Broadcast: Store a memory box for F-code relay broadcast transmission.
    Up to 30 destinations can be stored to forward the received data. The sub-address and passcode that you program in the memory box are necessary for the other machine to send a fax to the machine by F-code relay request transmission.
Memory Box Name Enter a name (maximum of 18 characters) for the memory box.
Sub Address/Passcode Enter a sub-address and passcode. A maximum of 20 digits can be entered for each sub-address and passcode.
Separate a sub-address and passcode by a slash ("/").
Items displayed when storing a confidential memory box
Print PIN Set a "Print PIN" for confidential reception. Enter a 4-digit number.
Items displayed when storing a relay broadcast memory box
Recipients Select the end recipients of the relay broadcast. Select the recipients from the address book.
  • Select the recipient from the address book: Selects an address from the address book.
  • Destination Entry: An address that is not stored in the address book can be directly entered. Enter the address in the same way as when storing an address for a mode.
  • All Destinations: This displays a list of the selected recipients. Addresses can be deleted from this list if needed.

Deleting an F-Code Memory Box

To delete a selected F-code memory box, set the checkbox at the left of its name to and tap the [Delete] key.
  • A passcode can be omitted.
  • Do not forget the Print PIN. In the event that you forget the Print PIN or need to verify the Print PIN, contact your dealer or nearest "SHARP Service Department".
  • When programming a new memory box, a sub-address that is already programmed for another box cannot be used. However, the same passcode can be used for more than one memory box.
  • "" and "#" cannot be used in a sub-address.
Back to top