SPECIFYING A PAPER POSITION (POSITION IMAGE)

Overview

This function moves the scanned original to a specified position to make a copy.

Position Image must be specified before scanning the original.

Operation

  1. 2

    Tap the [Others] key, and tap the [Position Image] key

  2. 2

    Specify the print start position

    Tap the numeric value display field on the front or reverse side, and enter the print start position using the numeric keys.
    Or tap icon to enter the print start position.
    After the settings are completed, tap icon and the [Back] key in sequence.

    If you set the [Adjust 2nd pg value to 1st.] checkbox to , you can set the front side and reverse side separately.
    To cancel the position image setting:
    Tap the [Clear] key.
  3. 2

    Place an original, and tap the [Preview] key

    Place the original in the automatic document feeder or on the document glass.
  4. 2

    Check the preview image in the preview screen

    To cancel all settings:
    Tap the [CA] key.
  5. 2

    Tap the [Color Start] or [B/W Start] key to start copying

    To make two or more sets of copies:
    Tap the copies display key to specify the number of copies.
Back to top