ADJUSTING RED / GREEN / BLUE IN COPIES(RGB)

Overview

This function selects any one of the three color components R (red), G (green), and B (blue) to increase or decrease the selected color tone.

RGB must be specified before scanning the original.

Operation

  1. 2

    Tap the [Others] key, and tap the [RGB Adjust] key

  2. 2

    Tap the key of the color you want to adjust

  3. 2

    Tap icon or slide the slider to adjust the color

    After the settings are completed, tap icon and the [Back] key in sequence.

    Only one color can be adjusted. If you adjust one color and then adjust another color, the adjustment of the first color is canceled.
    To cancel the RGB Adjust setting:
    Tap the [Off] key.
  4. 2

    Place an original, and tap the [Preview] key

    Place the original in the automatic document feeder or on the document glass.
  5. 2

    Check the preview image in the preview screen

    To cancel all settings:
    Tap the [CA] key.
  6. 2

    Tap the [Color Start] key to start copying

    To make two or more sets of copies:
    Tap the copies display key to specify the number of copies.

Back to top