PRINTING ON ENVELOPE
Overview
The bypass tray can be used for envelope printing.
Before using an actual envelope, you should do a trial print and check a preview image.
Before using an actual envelope, you should do a trial print and check a preview image.
- For the types of paper that can be used in the bypass tray, see "APPLICABLE PAPER TYPES".
- For the procedure for loading paper into the bypass tray, see "BYPASS TRAY".
- For details on paper selection, see "CHECKING PAPER TRAY SETTING".
- This feature rotates an image by 180 degrees to print paper that can be loaded in only one orientation such as envelopes. For more information, see "ROTATING A PRINT IMAGE BY 180 DEGREES".
Operation
Select the envelope size in the settings of the application ("Page Setup" in many applications) and then perform the following steps.
Click the [Paper] tab and select the envelope size from the "Paper Size" menu
Select [Bypass Tray] from the "Paper Source" menu of "Paper Selection"
Envelopes can be loaded into the bypass tray.
Select [Envelope] from "Paper Type"
Set the paper type of the bypass tray to [Envelope] and load envelopes into the bypass tray.