SCANNING BOTH SIDES OF AN ORIGINAL AUTOMATICALLY (2-SIDED ORIGINAL)

Overview

The automatic document feeder is used to automatically scan both sides of an original.

The settings on 2-sided scanning are cleared when transmission has completed.
  • 2-sided scanning is not possible when a mixed-size original is scanned.
  • You cannot use 2-sided scanning when the original size is set to Long Size.

Operation

  1. Tap the [Original] key

  2. Tap the [2-Sided Booklet] or [2-Sided Tablet] key

    See the figure below to check the binding edge of the original and tap the appropriate key.

  3. Tap the [Image Orientation] key with the same orientation as the placed original

    If this setting is not correct, a suitable image may not be transmitted.
    After the settings are completed, tap .
    To cancel 2-sided scanning:
    Tap the [2-Sided Tablet] or [2-Sided Booklet] key again to release the selection.
Back to top