MANUAL FINISHING

Overview

In manual finishing mode, you can set for finish on copied or printed pages.
You can select the manual finishing mode if the inserter is installed. When the finisher, saddle finisher, punch module, or folding unit is installed, finishing operations, such as stapling, punching or folding, can be performed.

Manual finishing cannot be used if the use of manual finishing or inserter is prohibited in "Setting mode".

To specify whether or not to prohibit the use of manual finishing or inserter:

In "Setting mode (administrator)", select [System Settings] → [Operation Settings] → [Disable Manual Finishing] to set the use of manual finishing. Select [System Settings] → [Device Control] → [Disabling of Inserter] to set the use of the inserter.