AUTHENTICATION BY USER NUMBER
Overview
The following procedure is used to log in using a user number received from the administrator of the machine.
When starting the machine, the login screen appears.
When starting the machine, the login screen appears.
![](./panel/01020001.jpg)
When controlled by user number
Contact the machine administrator to check the user number assigned for you.
![](../images/ic_Limit.png)
If an incorrect user number is entered three times in a row:
If "A Warning when Login Fails" is enabled in the system settings, the operation panel will be locked for five minutes if an incorrect user number is entered three times in a row.Contact the machine administrator to check the user number assigned for you.
Operation
![](../images/step_01.jpg)
Each entered digit will be displayed as "
".
![](./icon/Asterisk_S.jpg)
![](../images/step_02.jpg)
If the entered user number is authenticated, the number of remaining pages that the user can copy or scan is displayed.
When a limitation is set for the number of pages that a user can use, the use count for the user that has logged in is displayed.
When a limitation is set for the number of pages that a user can use, the use count for the user that has logged in is displayed.
![](./panel/01020004.jpg)
![](../images/ic_System.png)
- To limit the number of pages that a user can use:In "Setting mode", select [User Control] → [Page Limit Group List].
- To hide the number of pages that can be used after login:In "Setting mode", disable [User Control] → [Default Settings] → [Display Usage Status after Login].
- To change the message display time:In "Setting mode", select [System Settings] → [Operation Settings] → [Message Time Setting].
![](../images/ic_Memo.png)
![](../images/step_03.jpg)
![](./panel/01020005.jpg)