LOADING PAPER INTO A LARGE CAPACITY TRAY
Overview
Use the large capacity tray for outputting massive prints that cannot be processed using the regular tray.
The tray can hold up to 3500 sheets of 8.5" x 11"size paper (21 lbs or 80 g/m2).
When changing the paper size, contact your dealer or SHARP Service Department.
The tray can hold up to 3500 sheets of 8.5" x 11"size paper (21 lbs or 80 g/m2).
When changing the paper size, contact your dealer or SHARP Service Department.
![](../images/ic_Caution1.png)
![](../images/ic_Memo.png)
![](../images/ic_System.png)
To check the type of paper to be set in the tray:
In "Setting mode", select [System Settings] → [Paper Tray Settings].
Operation
![](../images/step_01.jpg)
Gently pull the tray out until it stops.
![](./illust/Lcc_open.jpg)
![](../images/step_02.jpg)
Load the paper with the print side facing down. The stack must not be higher than the indicator line (maximum of 3500 sheets).
![](../images/ic_Memo.png)
![](./illust/Lcc_paper_set.jpg)
![](../images/step_03.jpg)
Push the tray firmly all the way into the machine.
![](./illust/Lcc_close.jpg)