APPLICATION COMMUNICATION
Overview
This module enables you to link the machine with a scanner application and other standard applications. Set a standard application in "Setting mode" and "Sharp OSA".
![](../images/ic_System.png)
To set a standard application in "Setting mode":
In "Setting mode", select [Application Settings] → [External Applications Settings] → [Standard Applications].
Operation
![](../images/step_01.jpg)
If no standard applications have been stored, the key cannot be tapped.
![](./panel/01042001.jpg)
![](../images/step_02.jpg)
If two or more standard applications have been stored, the screen for selecting a standard application will appear. Tap the standard application that you wish to use.
If only one standard application has been stored, connection to the standard application will begin.
If only one standard application has been stored, connection to the standard application will begin.
![](./panel/01042002.jpg)
![](../images/step_03.jpg)
The message "Connecting to the external application." appears while the machine communicates with the standard application.