COPYING SEQUENCE
First, tap the [Copy] icon on the home screen to enter the Copy mode.
![](../images/step_01.jpg)
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
![](./illust/original-set(RSPF+Glass).jpg)
![](../images/step_02.jpg)
Tap the [Preview] key to scan the original.
![](../images/ic_Memo.png)
- To make 2-sided copies, configure the 2-sided copy settings before scanning the original.
- When not checking the preview image, tap the [Start] key to start copying.
![](./panel/02002002.jpg)
![](../images/step_03.jpg)
Display the preview image of the scanned original.
Check settings such as duplex and staple positions in the preview screen.
Check settings such as duplex and staple positions in the preview screen.
![](./panel/02002007.jpg)
![](../images/step_04.jpg)
Tap the [Start] key.
When making only one set of copies, you do not need to specify the number of copies.
When making only one set of copies, you do not need to specify the number of copies.
![](../images/ic_Limit.png)
- To make two or more sets of copies:Tap the copies display key to specify the number of copies.
- To cancel all settings, tap the [CA] key.When the [CA] key is tapped, all settings selected to that point are cleared and you will return to the base screen.
-
To cancel copying:Tap the [STOP] key.
-
![](./panel/10key_panel.jpg)
![](../images/ic_Memo.png)