USING THE DOCUMENT GLASS FOR 2-SIDED COPYING
Overview
![](../images/ic_Memo.png)
![](./concept/AUTO_2-SIDED-COPY1.jpg)
![](../images/ic_System.png)
To change the default 2-sided copy mode:
In "Setting mode", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [2-Sided Copy].
Operation
![](../images/step_01.jpg)
After the settings are completed, tap
.
![](./icon/WINDOW_OK.jpg)
![](./panel/02008001.jpg)
![](../images/step_02.jpg)
![](../images/ic_Limit.png)
![](../images/step_03.jpg)
Repeat this step until all originals have been scanned.
![](../images/step_04.jpg)
- To change the paper (tray), tap the [Paper Select] key.
![](./panel/02009004.jpg)
![](../images/ic_Memo.png)
![](../images/step_05.jpg)
When making only one set of copies, you do not need to specify the number of copies.
![](../images/ic_Limit.png)
![](./panel/10key_panel.jpg)