AUTOMATIC RATIO SELECTION
Overview
This section explains how to automatically select the appropriate ratio to meet the paper size when manually changing the paper tray to make a copy on paper that has a size different from the original.
![](../images/ic_Memo.png)
![](./panel/02013001.jpg)
![](../images/ic_System.png)
To change the default ratio:
In "Setting mode", select [System Settings] → [Copy Settings] → [Initial Status Settings] → [Copy Ratio].
Operation
![](../images/step_01.jpg)
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
![](../images/step_02.jpg)
The reduction or enlargement ratio is automatically selected based on the original size and the selected paper size.
![](./panel/02013001.jpg)
The automatically selected ratio will appear in the ratio display.
![](../images/ic_Limit.png)
- To cancel the Auto Ratio Selection setting:Tap the [Auto Image] key on the action panel to clear the check box like
.
- To return the ratio to 100%:Tap the [Copy Ratio] key to display the ratio menu, and then tap the [100%] key.