ADDING MARGINS(MARGIN SHIFT)
Overview
This function shifts the copy image right, left or down to adjust the margin.
This is convenient when you wish to bind the copies with a string or in a binder.
This is convenient when you wish to bind the copies with a string or in a binder.
Shifting the image to the right so the copies can be bound at the left edge
![](./concept/FC_MARGINSHIFT-1.jpg)
Not using the Margin Shift | Using the Margin Shift |
---|---|
![]() |
![]() |
Staple positions
![](./concept/FC_MARGINSHIFT-2.jpg)
![](../images/ic_Limit.png)
![](../images/ic_System.png)
To change the default margin shift setting:
In "Setting mode", select [System Settings] → [Copy Settings] → [Copy Setting] → [Initial Margin Shift Setting].
Operation
![](../images/step_01.jpg)
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
![](../images/step_02.jpg)
![](../images/step_03.jpg)
![](../images/step_04.jpg)
![](../images/ic_Memo.png)
- Tap the numeric value display indicating the margin shift area on the front side or reverse side, and enter the area using the numeric keys.
- To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with
.
- If you set the [Adjust 2nd pg value to 1st.] checkbox to
,
goes out and you can set sides 1 and 2 separately.
![](./panel/_02023001.jpg)
After the settings are completed, tap
and [Back] keys in sequence.
![](./icon/WINDOW_OK.jpg)
![](../images/ic_Limit.png)
- To cancel the margin shift setting:Tap the [Off] key.
- To cancel all settings:Tap the [CA] key.
![](../images/step_05.jpg)
Check whether or not settings produce the required results.
![](../images/ic_Limit.png)
Tap the [CA] key.
![](../images/step_06.jpg)
When making only one set of copies, you do not need to specify the number of copies.
![](../images/ic_Limit.png)
![](./panel/10key_panel.jpg)