COLLECTIVELY SCANNING A LARGE NUMBER OF ORIGINALS(JOB BUILD)
Overview
This function divides the originals into sets and feeds each set through the automatic document feeder one set at a time when copying a very large number of originals.
Use this function when you wish to copy all of the originals as a single job but the number of originals exceeds the maximum number that can be inserted.
This function is convenient when you wish to sort copies of a large number of originals into multiple sets. Because all originals are copied as a single job, you are saved the trouble of sorting the copies that would be required if the originals were divided into separate copy jobs.
When scanning originals in sets, divide the sheets so that no set has more than the number of paper that can be loaded, and then scan from the set with the first page.
The individual copy settings can be configured for each set of originals to be scanned separately.
Use this function when you wish to copy all of the originals as a single job but the number of originals exceeds the maximum number that can be inserted.
This function is convenient when you wish to sort copies of a large number of originals into multiple sets. Because all originals are copied as a single job, you are saved the trouble of sorting the copies that would be required if the originals were divided into separate copy jobs.
When scanning originals in sets, divide the sheets so that no set has more than the number of paper that can be loaded, and then scan from the set with the first page.
The individual copy settings can be configured for each set of originals to be scanned separately.
![](./concept/FC_JOBBUILD.jpg)
![](../images/ic_Memo.png)
- The Job Build mode must be specified before scanning the original.
- If the Quick File Folder of document filing mode is full, copying in job build mode will be impeded. Delete unnecessary files from the Quick File Folder.
![](../images/ic_Limit.png)
- Dual Page Copy
- Book Copy
- Card shot
- Multi-Page Enlargement
- 12" x 18" (A3) full bleed copy
- Repeat layout
Operation
Copying in job build mode
![](../images/step_01.jpg)
A checkmark appears on the icon.
![](../images/ic_Limit.png)
Tap the [Job Build] key to uncheck it.
After the settings are completed, tap the [Back] key.
![](../images/step_02.jpg)
Insert the originals all the way into the document feeder tray. Originals can be stacked up to the indicator line.
![](./illust/ORIGINAL-SET_GUIDE(RSPF).jpg)
![](../images/step_03.jpg)
![](../images/ic_Memo.png)
When scanning the next original without changing any settings, go to step 5.
![](../images/step_04.jpg)
Repeat this step until all originals have been scanned.
![](../images/step_05.jpg)
Check whether or not settings produce the required results.
![](../images/ic_Limit.png)
Tap the [CA] key.
![](../images/step_06.jpg)
When making only one set of copies, you do not need to specify the number of copies.
![](../images/ic_Limit.png)
![](./panel/10key_panel.jpg)
Tap the copies display key to specify the number of copies.
- You cannot set a number of copies for each set.
Changing the copy settings for each set of originals
As necessary, change copy settings for each set of originals.
Perform the steps below before scanning the next original in step 4 above.
Perform the steps below before scanning the next original in step 4 above.
![](../images/step_01.jpg)
![](./icon/key_check_wh.jpg)
![](../images/step_02.jpg)
![](../images/step_03.jpg)
Repeat this step until all originals have been scanned.