INSERTING INSERTION SHEETS IN BETWEEN TRANSPARENCY FILMS(TRANSPARENCY INSERTS)
Overview
When copying on transparency film, the sheets may stick together due to static electricity.
The transparency inserts function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the sheets easy to handle.
It is also possible to copy on insertion sheets.
The transparency inserts function can be used to automatically insert a sheet of paper between each sheet of transparency film, making the sheets easy to handle.
It is also possible to copy on insertion sheets.
![](./concept/FC_TRANSPARENCY(OHP).jpg)
![](../images/ic_Memo.png)
![](../images/ic_Limit.png)
- The number of copies cannot be selected in this mode.
- Transparency film can only be placed in the bypass tray.
Operation
![](../images/step_01.jpg)
After loading the transparency film, configure the bypass tray settings.
![](./illust/BYPASSTRAY_PAPER_SET_OHP.jpg)
![](../images/step_02.jpg)
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
![](../images/step_03.jpg)
![](../images/step_04.jpg)
When making a copy on insertion sheets, tap the [Also Make Copy on Inserts] checkbox to set to
.
After the settings are completed, tap
and [Back] keys in sequence.
![](./icon/key_check_wh.jpg)
After the settings are completed, tap
![](./icon/WINDOW_CLOSE.jpg)
![](../images/ic_Limit.png)
To cancel the transparency inserts setting:
Tap the [Off] key.
![](./panel/02033001.jpg)
![](../images/step_05.jpg)
Check whether or not settings produce the required results.
![](../images/ic_Limit.png)
Tap the [CA] key.
![](../images/step_06.jpg)
When making only one set of copies, you do not need to specify the number of copies.
![](../images/ic_Limit.png)
![](./panel/10key_panel.jpg)