COPYING A PAMPHLET(BOOK COPY)
Overview
This function makes a copy of the two facing pages of an open book or other bound document.
Copies made with this function can be folded at the center to create a booklet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
Copies made with this function can be folded at the center to create a booklet.
This function is convenient for arranging copies into an attractive booklet or pamphlet.
How to place the original
![](./concept/FC_BOOK-1.jpg)
![](../images/ic_Memo.png)
- Book Copy must be specified before scanning the original.
- Four original pages will be copied onto each sheet of paper. Blank pages will be automatically added at the end if the total number of original pages is not a multiple of four.
- This function can be combined with saddle stitch or fold if a saddle finisher is installed.
- When the book copy function is selected, 2-sided copying mode is automatically selected.
When settings are selected that prevent 2-sided copying, the book copy function cannot be used.
Operation
![](../images/step_01.jpg)
Place the opened pages of the "front and last sheets".
![](./illust/ORIGINAL-SET(GLASS)_BOOK-COVER.jpg)
![](../images/step_02.jpg)
![](../images/step_03.jpg)
When not inserting a cover, tap the
and [Back] keys in sequence. Then, go to step 5.
![](./icon/WINDOW_OK.jpg)
![](../images/ic_Limit.png)
Tap the [Off] key.
![](../images/step_04.jpg)
To make a copy on the inserted cover sheet, check the [Make Copy on Cover (Duplex)] box so that
appears.
![](./icon/key_check_wh.jpg)
![](./panel/02035001.jpg)
![](../images/ic_Memo.png)
To change the cover input tray:
Tap the [Paper Tray] key to display the tray selection screen. Tap the cover input tray on the tray selection screen. For more information, see "SELECTING THE PAPER TRAY FOR COPYING".
![](../images/ic_Limit.png)
- If the cover will be copied on, label sheets, transparency film, and tab paper cannot be used.
- This setting is not available when the covers/inserts function is disabled in the setting mode.
After the settings are completed, tap
and [Back] keys in sequence.
![](./icon/WINDOW_OK.jpg)
![](../images/step_05.jpg)
Scanning of the original starts.
![](../images/step_06.jpg)
Repeat this step until all original pages have been scanned.
Scan the remaining original pages in the following order:
Scan the remaining original pages in the following order:
- Inside of the front cover and the 1st page (facing pages)
- Inside of the 2nd and 3rd pages (facing pages)
- ...
- Inside of the last page and back cover (facing pages)
![](../images/ic_Limit.png)
![](../images/step_07.jpg)
Check whether or not settings produce the required results.
![](../images/ic_Limit.png)
Tap the [CA] key.
![](../images/step_08.jpg)
When making only one set of copies, you do not need to specify the number of copies.
![](../images/ic_Limit.png)
![](./panel/10key_panel.jpg)