COPYING CAPTIONS ONTO TAB PAPER(TAB COPY)
Overview
Load a tab sheet in the bypass tray, and make a copy on a tab.
Prepare appropriate originals for tab captions.
Prepare appropriate originals for tab captions.
![](./concept/FC_TAB.jpg)
Relation between the originals and the tab paper
Tab copying with a left binding
Originals | Placing the originals | Loading tab paper |
---|---|---|
![]() |
![]() |
![]() |
![]() |
Tab copying with a right binding
Originals | Placing the originals | Loading tab paper |
---|---|---|
![]() |
![]() |
![]() |
![]() |
![](../images/ic_Memo.png)
![](../images/ic_System.png)
To change the default image shift width for tab copying:
In "Setting mode", select [System Settings] → [Copy Settings] → [Copy Setting] → [Initial Tab Copy Setting].The default image shift width can be set from 0" to 5/8" (0 mm to 20 mm). The factory default setting is "1/2" (10 mm)".
Operation
![](../images/step_01.jpg)
![](../images/step_02.jpg)
![](../images/step_03.jpg)
![](../images/ic_Memo.png)
- Tap the numeric value display indicating the image shift width, and enter a shift width using numeric keys.
- To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with
.
![](./panel/02036001.jpg)
After the settings are completed, tap
and [Back] keys in sequence.
To cancel the tag copy setting:
Tap the [Off] key.
![](./icon/WINDOW_CLOSE.jpg)
![](../images/ic_Limit.png)
Tap the [Off] key.
![](../images/step_04.jpg)
When using the bypass tray, place the paper with the print side down.
Place the paper so that the sides with the tabs enter the machine last.
Place the paper so that the sides with the tabs enter the machine last.
After loading tab paper into the bypass tray, configure the bypass tray settings as explained in "MAKING COPIES USING THE BYPASS TRAY".
![](./illust/PAPER-SET-BYPASS_TAB.jpg)
![](../images/ic_Memo.png)
![](../images/step_05.jpg)
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
![](../images/step_06.jpg)
Check whether or not settings produce the required results.
![](../images/ic_Limit.png)
Tap the [CA] key.
![](../images/step_07.jpg)
When making only one set of copies, you do not need to specify the number of copies.
![](../images/ic_Limit.png)
![](./panel/10key_panel.jpg)