ADDING A REGISTERED IMAGE TO AN ORIGINAL(CUSTOM IMAGE)
Overview
This function adds an image registered in the machine to an original to make a copy.
There are following two types of custom images.
- Custom stamp
- Custom watermark (Stamp image with gray-scale watermark)
![](./concept/ill_image-Stamp_c.jpg)
![](./concept/ILL_IMAGE_WATERMARK.jpg)
![](../images/ic_Memo.png)
- An image must be registered in advance from the printer driver to the machine.
For information about how to register an image, see "REGISTERING A CUSTOM IMAGE""REGISTERING A CUSTOM IMAGE" (User's Manual)". - A custom stamp image is copied by sheet, not by original. If 2in1, 4in1 is enabled, user stamps are copied for each set of pages.
- A custom stamp image is copied with the registered size. The size remains unchanged even when the copy ratio is enlarged or reduced.
- A different custom image cannot be specified for each page.
- If an image runs off of the specified paper depending on the registered size or position, the excess will not be copied.
![](../images/ic_Memo.png)
Stamp copy is performed when a custom image with the same file name is registered in both the master and slave machines.
If it is not registered, a copy will be made without a custom image.
The combination with other functions is described in the table below.
Combined function | Custom image operations |
---|---|
Margin Shift | Shifts in the same way as for an original image. |
Erase | Makes a stamp copy as normal. |
Dual Page Copy | Makes a stamp copy by sheet. |
Pamphlet Copy | Makes a stamp copy as normal. |
Job Build | Makes a stamp copy as normal. |
Covers/Inserts | Based on the custom image setting. |
Transparency Inserts | Makes a stamp copy as normal. |
2in1 | Makes a stamp copy by sheet. |
Book Copy | Makes a stamp copy as normal. |
Tab Copy | Makes a stamp copy as normal regardless of image shift setting. |
Card Shot | Makes a stamp copy by sheet. |
Mirror Image | Makes a stamp copy as normal without mirror image reverse. |
B/W Reverse | Prints an image as normal without B/W reverse. However, the following condition is set when printed on a dark background. Custom stamp: Printed in white Custom watermark: Printed without being whitened |
A3 Wide Paper | Makes a stamp copy as normal. |
Centering | Makes a stamp copy as normal without centering. |
Stamp | Makes a stamp copy on the Stamp menu. |
Photo Repeat | Cannot be combined. |
Multi-Page Enlargement | Cannot be combined. |
Pattern Print | Makes a stamp copy under a pattern print. |
Repeat Layout | Cannot be combined. |
Position Image | Prints an image at the original position regardless of the Position Image setting. |
Book Divide | Makes a stamp copy by sheet. |
Operation
![](../images/step_01.jpg)
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
![](../images/step_02.jpg)
![](../images/step_03.jpg)
![](../images/step_04.jpg)
Select the required thumbnail image(s) from the available selection.
![](../images/step_05.jpg)
![](./panel/02061001.jpg)
For custom stamp
For custom watermark
Print Page | Specify a page(s) for stamp copy. First Page or All Pages | |
Print Position | Specify a position for stamp copy. | |
Originals | ORIGINAL PLACEMENT ORIENTATION | Specify the original orientation. |
2-Sided Original Type | Specify the binding edge for 2-sided original. Book or Tablet | |
Angle | Specify the corner of the image. 0 degrees, -90 degrees, 90 degrees, or 180 degrees |
Print Pattern | Specify the image watermark print pattern. Transparent: Makes an original image transparent for stamp copy. Overlap: Hides a watermark added to an original image for stamp copy. |
|
Exposure | Select the exposure of a watermark from nine levels. | |
Print Page | Specify a page(s) for stamp copy. First Page or All Pages |
|
Print Position | Specify a position for stamp copy. | |
Originals | ORIGINAL PLACEMENT ORIENTATION | Specify the original orientation. |
2-Sided Original Type | Specify the binding edge for 2-sided original. Book or Tablet | |
Angle | Specify the corner of the image. 0 degrees, -90 degrees, 90 degrees, or 180 degrees |
After the settings are completed, tap
and [Back] keys in sequence.
![](./icon/WINDOW_CLOSE.jpg)
![](../images/ic_Memo.png)
Tap the [Off] key.
![](../images/step_06.jpg)
Check whether or not settings produce the required results.
![](../images/ic_Limit.png)
Tap the [CA] key.
![](../images/step_07.jpg)
When making only one set of copies, you do not need to specify the number of copies.
![](../images/ic_Limit.png)
![](./panel/10key_panel.jpg)