SPECIFYING A PAPER POSITION(POSITION IMAGE)
Overview
This function moves the scanned original to a specified position to make a copy.
You can make a copy in any desired position as you can fine adjust the position.
![](../images/ic_Memo.png)
![](./concept/MOVE_COPY.jpg)
Operation
![](../images/step_01.jpg)
![](../images/step_02.jpg)
![](../images/ic_Memo.png)
- Tap the area indicating the movement distance on the front or reverse side, and enter the distance using numeric keys.
- To quickly set the area, first specify a value close to the desired value by the numeric keys, then adjust it with
.
- If you set the [Adjust 2nd pg value to 1st.] checkbox to
,
goes out and you can set sides 1 and 2 separately.
![](./panel/02064001.jpg)
After the settings are completed, tap
and [Back] keys in sequence.
![](./icon/WINDOW_OK.jpg)
![](../images/ic_Limit.png)
To cancel the Position Image setting:
Tap the [Clear] key.
![](../images/step_03.jpg)
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
![](../images/step_04.jpg)
Check whether or not settings produce the required results.
![](../images/ic_Limit.png)
Tap the [CA] key.
![](../images/step_05.jpg)
When making only one set of copies, you do not need to specify the number of copies.
![](../images/ic_Limit.png)
![](./panel/10key_panel.jpg)