INTERRUPT COPY
Overview
This function suspends a job in progress, and preferentially prints the original specified with interrupt copy.
When you need to make an urgent copy and the machine is busy with a long copy run or other job, use interrupt copy.
When you need to make an urgent copy and the machine is busy with a long copy run or other job, use interrupt copy.
![](../images/ic_Limit.png)
- The [Interrupt] key does not appear while an original is being scanned.
- Depending on the settings of the job in progress, the [Interrupt] key may not appear.
- Interrupt copy cannot be used in combination with the following functions:
Job Build, Tandem Copy, Book Copy, Card Shot, Multi-Page Enlargement, Original Count, Proof Copy, Preview Setting, Book Divide - When you place an original on the document glass, you cannot select the 2-sided copying, sort mode, and staple sort features to make an interrupt copy.
If any of these functions are necessary, use the automatic document feeder.
Operation
![](../images/step_01.jpg)
The interrupt mode screen appears.
![](../images/ic_Memo.png)
tap the [Interrupt] key to display the user authentication screen. Enter the user name and password to perform user authentication.
![](./panel/02067001.jpg)
![](../images/step_02.jpg)
Place the original in the document feeder tray of the automatic document feeder, or on the document glass.
![](../images/step_03.jpg)
![](../images/ic_Limit.png)
![](../images/step_04.jpg)
When the interrupt copy job is completed, the interrupted job resumes.
![](../images/ic_Limit.png)