ADJUST THE LINE THICKNESS(LINE THICKNESS)
Overview
This function increases the thickness of the entire line when the print lines are not clear in CAD or other special applications.
When the data includes lines of varying widths, you can print all lines at the minimum width as necessary.
When the data includes lines of varying widths, you can print all lines at the minimum width as necessary.
![](./concept/ill_image-LineWidth.jpg)
![](../images/ic_Limit.png)
- This function is available in a Windows environment.
- This function can be used when the PCL6 printer driver is used.
Operation
Windows
![](../images/step_01.jpg)
![](../images/step_02.jpg)
![](../images/ic_Memo.png)
-
The units of line-width adjustment can be set to "Fixed Width" or "Ratio".
Click the [Compatibility] button and select the units from the "Line Width Unit" menu. - To print all line data in the minimum line width, click the [Compatibility] button and click the [Print in the Minimum Line Width] checkbox.
![](./capture/DR_LINE.jpg)