PRINTING AND SENDING SIMULTANEOUSLY
Overview
This function prints data created in an application from the machine and simultaneously sends the data to the addresses stored in the machine.
This function allows you to complete two tasks, printing and sending, with one operation from the printer driver.
This function allows you to complete two tasks, printing and sending, with one operation from the printer driver.
![](../images/ic_Memo.png)
- Addresses must be stored in advance in the machine. For more information, see "STORING CONTACTS".
- You must complete the preparatory steps for using each sending function of the machine. For more information, see the explanation of each sending function.
![](../images/ic_Limit.png)
- This function is available in a Windows environment.
- This function can be used when the PCL6 printer driver is used.
- You cannot print and send data simultaneously when [System Settings] in "Setting mode" → [Printer Settings] → [Default Settings] → [Prohibit utilize sending function at print] is selected.
Operation
Windows
![](../images/step_01.jpg)
![](../images/step_02.jpg)
![](./icon/dr_Checkbox-On_S.jpg)
![](../images/step_03.jpg)
![](../images/step_04.jpg)
- If you wish to send the data to all addresses, click the [Add All] button.
- To delete an address from the "Destination" list, select the address and click the [Delete] button. If you wish to delete all addresses, click the [Delete All] button.
![](../images/ic_Memo.png)
![](../images/step_05.jpg)
![](../images/ic_Memo.png)
![](./capture/DR_PRINT_AND_SEND.jpg)